Moplen RP348N

Polypropylene, Random Copolymer

Product Description

Moplen RP348N is a polypropylene random copolymer. With its high clarity, good chemical resistance, and good balance of rigidity and impact performance, this grade is suitable for a variety of injection molding applications. Potential end uses products include food containers, housewares, fan blades, motorcycle battery cases, and Injection Stretch Blow Moulding.

Product Characteristics

Status	Commercial: Active
Test Method used	ASTM
Availability	Asia-Pacific, Australia/NZ, Africa-Middle East
Processing Method	Injection Molding, Injection Stretch Blow Molding
Features	Good Chemical Resistance, High Clarity, Random Copolymer, Good Impact Resistance , Good Processability, Medium Rigidity
Typical Customer Applications	Caps & Closures, Housewares, Bottles For Consumer Goods, Clear Containers

Typical Properties	Method	Value	Unit
Physical
Density -Specific Gravity (Method B)	ASTM D 792	0.90	g/cm³
Melt flow rate (230°C/2.16kg)	ASTM D 1238	11	g/10 min
Mechanical
Tensile Strength @ Yield	ASTM D 638	29	MPa
Flexural Modulus (Procedure A)	ASTM D 790	1050	MPa
Tensile Elongation @ Yld	ASTM D 638	13	%
Impact
Notched izod impact (23 °C, Method A)	ASTM D 256	64	J/m
Thermal
Heat deflection temperature at 0.46 N/mm2	ASTM D 648	86	°C

　

Notes

Typical properties; not to be construed as specifications.

　

© LyondellBasell Industries Holdings, B.V. 2011 LyondellBasell markets this product through the following entities: 　 　 Equistar Chemicals, LP Basell Sales & Marketing Company B.V. Basell Asia Pacific Limited Basell International Trading FZE LyondellBasell Australia Pty Ltd For the contact details of the LyondellBasell company selling this product in your country, please visit http://www.lyondellbasell.com/. Before using a product sold by one of the LyondellBasell family of companies, users should make their own independent determination that the product is suitable for the intended use and can be used safely and legally. SELLER MAKES NO WARRANTY; EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) OTHER THAN AS SEPARATELY AGREED BETWEEN THE PARTIES IN WRITING. This product(s) may not be used in the manufacture of any US FDA Class III Medical Device or Health Canada Class IV Medical Device and may not be used in the manufacture of any US FDA Class II Medical Device or Health Canada Class II or Class III Medical Device without the prior written approval by Seller of each specific product or application. Users should review the applicable Material Safety Data Sheet before handling the product. Addhere, Adflex, Adstif, Adsyl, Akoafloor, Akoalit, Alastian, Alathon, Alkylate, Amazing Chemistry, Aquamarine, Aquathene, Arconate, Arcopure, Arcosolv, Arctic Plus, Arctic Shield, Avant, Catalloy, Clyrell, CRP, Crystex, Dexflex, Duopac, Duoprime, Explore & Experiment, Filmex, Flexathene, Fueling the Power to Win, Get in touch with, Glacido, Hifax, Histif, Hostacom, Hostalen, Ideal, Integrate, Koattro, LIPP, Lucalen, Luflexen, Lupolen, Lupolex, Luposim, Lupostress, Lupotech, Metocene, Microthene, Moplen, MPDIOL, Nerolex, Nexprene, Petrothene, Plexar, Polymeg, Pristene, Prodflex, Pro-Fax, Punctilious, Purell, SAA100, SAA101, Sequel, Softell, Spherilene, Spheripol, Spherizone, Starflex, Stretchene, Superflex, TBAc , Tebol, T-Hydro, Toppyl, Trans4m, Tufflo, Ultrathene, Vacido and Valtec are trademarks owned or used by the LyondellBasell family of companies. Adsyl, Akoafloor, Akoalit, Alastian, Alathon, Aquamarine, Arconate, Arcopure, Arcosolv, Arctic Plus, Arctic Shield, Avant, CRP, Crystex, Dexflex, Duopac, Duoprime, Explore & Experiment, Filmex, Flexathene, Hifax, Hostacom, Hostalen, Ideal, Integrate, Koattro, Lucalen, Lupolen, Microthene, Moplen, MPDIOL, Nexprene, Petrothene, Plexar, Polymeg, Pristene, Pro-Fax, Punctilious, Purell, Sequel, Softell, Spheripol, Spherizone, Starflex, Tebol, T-Hydro, Toppyl, Tufflo and Ultrathene are registered in the U.S. Patent and Trademark Office. 　 Release Date: 05 Dec 2008